Lenovo IdeaPad S206 - Manual (Page 50)

Lenovo IdeaPad S200/S206 Hardware Maintenance Manual
46
Figure 8. Removal steps of system board
Remove six screws on the system board, two screws on the IO board and
single screw on the fan. Detach the power board connector in the direction
shown by arrows , unplug the speaker connector in the direction shown
by arrow , system board power connector in the direction shown by arrow
, two LCD connectors in the direction shown by arrows .
When installing: Make sure that all the connectors are attached firmly.
Step Screw (quantity) Color Torque
M2 X 3 mm, flat-head, nylok-coated (2) Silver 1.5 kgfcm
M2 × 2.5 mm, flat-head, nylok-coated (6) Black 1.5 kgfcm
M2 × 2.5 mm, flat-head, nylok-coated (1) Black 1.5 kgfcm
a a
b
e f
g
h c d
a
b a
a
a
a
a
a
a
g
d
c
h
e
f
a
a
a