Lenovo B475e Notebook - Manual (Page 73)

Applying labels to the base cover
The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when
you replace the base cover. For the labels which are not shipped with the new base cover, peel them off
from the old base cover, and adhere them to the new one.
Note: If you replace a part with the Windows Certificate of Authentication (COA) label 1 , return the old part
with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the
original location of the label on the computer and the information on the label, such as the part number,
serial number, and product key.
The following illustration shows the label locations on the base cover.
1
2
3
9
7
10
11
4
8
12
13
14
5
6
2 Brazil WLAN label, WLAN label for United
States/Canade/Taiwan, or Isreal label for WLAN
9 PPT label
3 Brazil WLAN label, WLAN label for United
States/Canade/Taiwan, or Isreal label for WLAN
10 China Telecome IMEI label
4 Brazil Bluetooth label or Bluetooth label for United
States/Canade/Taiwan
11 China Mobile IMEI label
5 Malaysia SIRIM label 12 WWAN IMEI barcode label
6 Indonesia WLAN and Bluetooth label 13 Vodafone label
7 Indonesia D side label 14 Rating label
8 China label, KCC label, or MTM label
2010 LCD front bezel
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 44
• “1020 Bottom slot cover” on page 44
• “1030 Hard disk drive” on page 45
Chapter 7 . Removing and replacing a FRU 67