Alpine CDA-7897 - Manual (Page 36)

34
-EN
i-Personalize™ Operation (CDA-7998 only)
Data Downloading
1
Insert the CD-R disc containing the data.
If the source is not the CD mode, press the SOURCE
button to change to the CD mode.
2
Press the -/J button for at least 2 seconds.
The mode switches to the download mode to show the
download confirmation screen.
3
Turn the Rotary encoder to select “OK,” and then
press the MODE button. Data search of the disc starts.
NOTES
• Selecting “NG” will halt the download mode.
• If a file is not found by the data search, “NO FILE” is
indicated.
• The “NO FILE” display will be automatically released if no
key is used (pressed) for 5 seconds.
4
After the data has been searched, the first file name is
displayed.
Turn the Rotary encoder to select “DOWNLOAD,” and
then press the MODE button.
Data downloading starts.
The file currently shown in the display is downloaded.
If you want to download other files, select NEXT FILE
to call up file names.
CANCEL : Halts the download
DOWNLOAD: Starts the download
NEXT FILE : Searches the next file
5
When data download is finished successfully, the
confirmation screen is displayed for 5 seconds and the
download mode closes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ data
The data is memorized in Preset 6 of the Parametric
EQ mode. The memorized data settings in Preset 6
(Parametric EQ mode) are automatically applied.
X-OVER (Cross over) data
The data is memorized in Preset 6 of the X-OVER
mode. The memorized data settings in Preset 6 (X-
OVER mode) are automatically applied.
You cannot download the data if the setting of the
2WAY/3WAY switch is not suitably set for downloaded
data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time
correction mode. The memorized data settings in
Preset 6 (Time correction mode) are automatically
applied.
NOTES
• The Profile data is not displayed on the confirmation screen.
• When you download the data again, the data is overwritten in
Preset 6.
MODE -/J
Rotary encoder
SOURCE
Data is memorized in Preset 6 of the
Parametric EQ Mode.
Data is memorized in Preset 6 of the
Time Correction Mode.
Data is memorized in Preset 6 of the
cross over mode.
Data is set to the opening display.
Parametric
equalizer
Time correction
Cross over
Profile
About i-Personalize™
• You can download data (from Alpine’s website) to a CD-R,
and download and store the data to the CDA-7998.
To start i-Personalize, access the URL below and
follow the on-screens instructions.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data
• The file name of download data shall be
“A_U ∗∗∗∗∗.MP3.”
You can create a file name via the website. Do not
change a file name once it has been created.
Malfunction may result.
NOTE
For details about procedures of download, see ALPINE’s Web
site.
A_U
∗∗∗∗∗.MP3
Extender (fixed)
Identifier (arbitrary alphabet or
number 5 letters maximum)
Header (fixed)