Lenovo IdeaPad Z710 Notebook - Manual (Page 50)

Lenovo Z710 Hardware Maintenance Manual
46
1090 Fan assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Dummy card (Optional)” on page 35
• “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 36
Figure 9. Removal steps of fan assembly
Detach the fan connector in the direction shown by arrow and loosen two
screws to lift the fan assembly.
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step Screw (quantity) Color Torque
M2.0 × 6 mm, flat-head, nylok-coated (2) Black 1.5 ~ 2.0 kgfcm
a
b
a
b
b
c
b