Lenovo K4450 Notebook User Manual
Page 29
Chapter 2. Using your computer
15
Sleep mode
If you are not going to use the computer for a short time, put the computer into sleep mode. When the
computer is in sleep mode, you can wake it up to resume use and bypass the startup process.
To put the computer into sleep mode, do the following:
•
Windows 7:
1. Click Start.
2. Click the triangle mark next to the Shut down icon, and then select Sleep.
•
Windows 8.1:
1. Move the cursor to the top-right or bottom-right corner of the screen to display the charms.
2. Click Settings.
3. Select Sleep from the Power menu options.
•
Press Fn + F1.
Attention:
Wait until the power indicator starts blinking (indicating that the computer is in sleep state)
before you move the computer. Moving the computer while the hard disk drive is spinning can damage the
hard disk drive, causing loss of data.
To wake up the computer, do one of the following:
•
Press the power button.
•
Press the Fn key on the keyboard.
Hibernation mode
By using this mode, you can turn off the computer completely without saving files or exiting from any
program that is running. When the computer enters hibernation mode, all open programs, folders, and files
are saved to the hard disk drive, and then the computer turns off.
To put the computer into hibernation mode, do the following:
•
Windows 7:
1. Click Start.
2. Click the triangle mark next to the Shut down icon, and then select Hibernation.
•
Windows 8.1:
1. Right-click the start button on the taskbar to enter Control panel, and then click Hardware and sound
→ Change what the power buttons do.
2. Click Change settings that are currently unavailable, and then tick Hibernate under Shutdown
settings
.
3. Move the cursor to the top-right or bottom-right corner of the screen to display the charms.
4. Click Settings.
5. Select Hibernation from the Power menu options.
Shutting down the computer
If you are not going to use the computer for a day or two, shut it down.
To shut down the computer, do the following:
•
Windows 7:
Click Start → Shut down.