AEG 88840 - Manual (Page 10)

1. Press the OPTION button repeatedly, until
the desired language appears in the dis-
play.
2. To confirm the choice press the OK button.
After this a text appears asking you again
to confirm the set language. This step is
added to ensure that you did not set a
language by mistake.
To confirm the choice press the OK button
again.
In case of a mistake or at any time after the first time use a short-cut is provided to avoid
going through the SETTINGS. Keeping pressed together the buttons STEAM LEVEL and
DRYNESS for about 5 seconds the language setting view appears.
Setting the time
Just after setting the language you are asked to
set the time.
Short help-text will change into the time setting
view as soon as you press the OPTION or OK but-
ton.
So that the time and the end of the programme
are correctly displayed, please check the time
shown in the display and set the current time if
necessary.
To select the time please use the OPTION button
to confirm press OK.
See also the chapter " SETTINGS".
Before first use
In order to remove any residues which may have been produced during production, wipe
the dryer drum with a damp cloth or carry out a brief drying cycle (30 MIN) with damp
cloths in the machine.
1. Turn the programme knob to TIME.
2. Press the TIME button repeatedly until 30' appears in the display.
3. Press the START PAUSE button.
LENGUAGE
ENG
SETTINGS
Press OPTION to set time. Press
OK to activate it.
CLOCK 12:02
SETTINGS
10 First start-up