Lenovo IdeaPad S100c Notebook - Manual (Page 60)

56
IdeaPad S100c Hardware Maintenance Manual
Figure 11. Removal steps of fan assembly and heat sink assembly (continued)
Lift the fan assembly and heat sink assembly in the direction shown by arrow c.
Be careful not to damage the connector.
3
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
a b
When installing:
Before you attach the fan assembly to the computer, apply thermal grease, •
at an amount of 0.2 grams, to the
a
part shown in the fi gure above. Either
too much or too less grease application can cause a thermal problem due to
imperfect contact with a component. You also need to peel the thin fi lm off
from the rubber
b
.