1140 antenna assembly and lcd cover – Lenovo IdeaPad Flex 14D Notebook User Manual
Page 65
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D
61
1140 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1030 DIMM” on page 38
• “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on
• “1050 Dummy card (Option)” on page 42
• “1070 System board” on page 45
• “1090 LCD unit” on page 50
• “1110 LCD front bezel” on page 58
• “1120 LCD panel, LCD cable and hinges” on page 59
Figure 14. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing:
Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a