Lenovo V560 Notebook User Manual
Page 34
30
Lenovo V560/B560 Hardware Maintenance Manual
Table 2. Status indicators
Indicator
Meaning
1
Drive in use
White:
Data is being read from or written to the hard disk
drive, or the optical disk drive. When this indicator
is on, do not put the computer into standby mode
or turn off the computer.
Note: Do not move the system while the white drive-in-use
light is on. Sudden physical shock could cause drive errors.
2
Num lock
White:
The separate numeric keypad on the keyboard is
enabled. To enable or disable the numeric keypad,
press the Num Lock key.
3
Caps lock
White:
Caps Lock mode is enabled. You can enter all
alphabetic characters (A-Z) in uppercase without
pressing the Shift key. To enable or disable Caps
Lock mode, press the CapsLk key.
4
Scroll lock
White:
Scroll Lock mode is enabled. To enable or disable
Scroll Lock mode, press and hold the Fn key, and
press the Delete (ScrLk) key.
5
Power on
White:
System is enabled.
Blinking white:
System is in sleep mode.
Off:
System is in hibernate mode or shut down.
6
Battery status
Blinking amber: (500ms off/1s on)
The remaining power of the battery is less than 5%
of its capacity.
Blinking amber: (100ms off/3.2s on)
The battery is being charged with the remaining
power between 5% and 20% of its capacity.
Amber:
The computer is operating on battery power with
the remaining power between 5% and 20% of its
capacity.
Blinking white:
The battery is being charged with the remaining
power between 20% and 80% of its capacity.
White:
The remaining power of the battery is more than
80% of its capacity, or the computer is operating on
battery power with the remaining power between
20% and 80% of its capacity.
7
Wireless status
White:
The wireless LAN radio is turned on and connected
to AP.
Blinking white:
The wireless LAN is switched on and the radio of
it is also turned off, or the wireless LAN radio is
turned on and not connected to AP.
Flashing white:
The wireless LAN radio is turned on and data is
being transmitted.
Off:
The wireless LAN is switched off and the radio of it
is also turned off.
8
Touchpad
White:
The touchpad is disabled. To enable or disable the
touchpad, press and hold the Fn key, and press
the F6 key.