Lenovo IdeaCentre B500 - Manual (Page 47)

Chapter 8. Replacing hardware
45
Replacing a memory module
To replace a memory module
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the thermal module. Refer to “Replacing the thermal module”.
3. Push out the latches on both sides of the memory socket to release
the memory module and gently pull the memory module upward to
remove it from its socket. Both memory modules can be removed by
using the same procedure.
4. Align then insert the new memory module into the socket and push
down on the top edge of the memory module. Make sure the latches
lock the memory module in place.
Replacing the MXM graphic card
To replace the MXM graphic card
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the thermal module. Refer to “Replacing the thermal module”.
3. Remove the two screws that secure the MXM graphic card to the
chassis.