Lenovo Miix 10 Tablet IdeaPad - Manual (Page 50)

46
IdeaPad Miix 10 Hardware Maintenance Manual
Figure 9. Removal steps of system board
Detach the camera board and LCD cable connectors shown by arrow
1
and
2
. Unplug the vibrator board and DC-IN Cable connectors shown by arrow
3
. Disconnect antenna GPS (gray) shown by arrow
4
, then remove the three
screws
5
and three screws
6
.
6
5
4 1
2
1
2
3
3
When installing: Make sure that all the connectors are attached firmly.
Step Screw (quantity) Color Torque
5
M1.6 × 1.8, MB to Bezel (3) Black 1.85+/-0.15kgf*cm
6
M1.6 × 2.5, MB to Bezel (3) Sliver 1.85+/-0.15kgf*cm