Lenovo ThinkServer RD230 - Manual (Page 5)

a. Hold a slide rail assembly by one hand and carefully slide both the ball rail and the inner rail out of
the front of the assembly until the ball rail is locked and cannot be pulled out further.
Figure 3. Sliding the ball rail with the inner rail out of the outer rail
b. Carefully slide the inner rail out of the ball rail until the inner rail is locked and cannot be pulled out
further. Then, press the release tab 1 on the inner rail in the direction as shown and completely
remove the inner rail from the ball rail.
Figure 4. Removing the inner rail from the ball rail
5