Lenovo V480s - Manual (Page 63)

Lift the thermal fan assembly in the direction shown by the arrow 9 .
Attention: Be careful not to damage the connector.
9
When installing: Before you attach the thermal fan assembly to the computer, apply thermal grease, at an
amount of 0.2 grams, on the part marked
a and b as shown in the following illustration. Either too much or
too less application of grease can cause a thermal problem due to imperfect contact with a component.
a
b
1160 Microprocessor
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 37
• “1020 Bottom slot cover” on page 38
• “1030 Memory modules” on page 38
• “1040 Hard disk drive assembly” on page 39
• “1050 PCI Express Mini Card for wireless LAN” on page 41
• “1060 mSATA solid-state drive” on page 43
Chapter 7 . Removing and replacing a FRU 57