AT&T CL82351 - Manual (Page 35)

Multiple handset use
29
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and the screen
shows
Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and
your handset shows
PTT From HS X To HS X (the first X represents the
initiating handset number, the second X represents your handset number;
a maximum of 4 handset numbers appear).
When your speakerphone light is off (the screen shows
Press and hold [PTT] to talk), press and hold PUSH TO TAL� on your
handset. You will hear a chirp. Speak towards the handset.
While you are speaking, your handset screen shows PTT To handset: X
( X represents the handset numbers of one or more destination handsets;
a maximum of 4 handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TAL�. Your handset will beep.
After the beep, if your speakerphone light is off, you can press and hold
PUSH TO TAL� to continue speaking, or the destination handset
can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your handset screen shows Press and hold [PTT] to talk, press
MENU
/SELECT. The screen shows >Intercom.
Press
MENU
/SELECT. Your handset displays Calling other handset or
Calling HANDSET X. The destination handset screen briefly shows Push
to talk Ended and then Other handset is calling or HANDSET X is
calling. The destination handset rings.
On the destination handset, press PHONE/
FLASH
or any of the dialing
keys ( 0-9, #, TONE or ) to answer the intercom call. Both handsets now
show Intercom.
To end the intercom call, press OFF/
CANCEL
or place the handset in the
telephone base or charger. Both screens show Intercom ended.
1.
2.
3.
•
•
1.
2.
3.
4.