AT&T CL82351 - Manual (Page 17)

Handset settings
Ringer volume
You can set the ringer volume level (1-6) to one of 6 levels or
turn the ringer off. When the ringer is off,
appears on the
screen.
1. Press MENU / SELECT in idle mode to enter the main menu.
2. Use q CID or p
DIR
to scroll to >Ringers, then press
MENU
/SELECT.
3. Press MENU / SELECT again to select >Ringer volume.
4. Press q CID or p
DIR
to sample each volume level.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTES:
The handset ringer volume also determines the ringer vol ume for
intercom calls.
If the ringer volume is set to off, that handset is silenced for all incoming calls.
However, the handset still plays the paging tone when responding to the handset locator.
If the ringer volume is set to off, caller ID will not be announced and
Caller ID won’t be announced
displays briefly on the screen.
Ringer tone
You can choose one of 10 ringer tones.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Ringers, then press
MENU
/SELECT.
3. Press q
CID
or p
DIR
to scroll to >Ringer tone, then press
MENU
/SELECT.
4. Press q
CID
or p
DIR
to sample each ringer tone.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
•
•
•
> Ringer tone
Ringer volume
p
q
RINGER TONE
> Tone 1
p
q
> Ringer volume
Ringer tone
p
q
>Ringers
Intercom
p
q
RINGER VOLUME
p
q
11
Telephone settings