4 audio setup – Audiovox D1710 User Manual
Page 24

24
OUTPUT Setting [DVD]
This portable DVD player provides two types of audio outputs; 2-channel stereo sound and digital sound output.
1
Press
SETUP in the stop mode.
2
Press / to select “AUDIO SETUP” and press
PLAY/SEL.
3
Press / to select “OUTPUT” and press
PLAY/SEL.
4
Press / to select a preferred output setting.
5
Press
PLAY/SEL.
NOTE:
"
The digital output connectors are used to output the digital audio track recorded on discs. You can output the digital signal via
coaxial output jack to digital audio decoder. If you set Audio Output to
the original sound recording format on discs (for example; Dolby Digital).
WARNING:
"
Do not set ”AUDIO SETUP” to “Digital” via the on-screen display unless you are connecting (via the DOLBY DIGITAL AUDIO OUT jack)
an A/V decoder that has the Dolby Digital (AC-3) decoding function. High volume audio may damage your hearing as well as the
speakers.
To return the screen to the SETUP MENU
Select “RETURN” and then press
PLAY/SEL.
To finish the setup operation
Press
SETUP to exit or select EXIT from SETUP MENU screen.
3-4
Audio Setup
Chapter 3