Direct printing with a kodak all-in-one printer, Printing from a kodak all-in-one printer, Printing pictures – Kodak MAX Z990 User Manual
Page 62
54
www.kodak.com/go/support
Install software
Printing pictures
Direct printing with a KODAK All-in-One Printer
IMPORTANT: To print using PICTBRIDGE Technology, you must change the Computer
Connection setting (in the Settings menu) to Other Application (
).
You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
1 Turn off the camera and printer.
2 Use the KODAK Camera USB Cable, Micro B / 5-Pin (included with the camera) to
connect the camera to the printer.
Printing from a KODAK All-in-One Printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
2 Choose a printing option, then press OK.
Current Picture—Press
to choose a picture.
Tagged Pictures—If your printer is capable, print pictures that you marked for
printing.
Index Print—Print thumbnails of all pictures. (This option requires one or more
sheets of paper.)
All Pictures—Print all pictures in internal memory or on a card.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see
.
Purchase cables, accessories