Kodak MAX Z990 - Manual (Page 24)

16 www.kodak.com/go/support
Taking pictures/videos
Using Panorama in SCN mode
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
IMPORTANT: In Panorama SCN mode, you take 2 or 3
pictures which the camera “stitches”
together in a panorama.
In Automatic Panorama mode—found in
Creative mode
(see page 18 )—you
“sweep” the camera in a continuous arc.
The camera then creates a panorama.
NOTE: For best results, use a tripod. Only the panoramic picture is saved; individual pictures are not.
(Exposure and white balance are set with the first picture. The flash is set to Off.)
1 Turn the Mode dial to SCN.
2 Press to choose Panorama Left-Right or Panorama Right-Left
(depending on the direction you want to pan), then press OK.
3 Take the first picture.
After a quickview, the LCD displays the liveview and an “overlay” from the first picture.
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture.
5 If you are taking/stitching only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: To use the self-timer 10-second or 2-second setting, see page 21 .
Take
2 or 3
pictures.
Get 1
panoramic
picture.