Kodak Z7590 - Manual (Page 82)

72 www.kodak.com/go/support
Troubleshooting
Power-ring-light status
Status Cause
Power ring does not
turn on and the
camera does not
work. ■ Turn on the camera.
■ Recharge the battery or install a new one ( page 2 ).
■ Turn Mode dial off, then back on.
Power ring glows
steady green. ■ Camera is on and ready to take a picture or video.
Power ring glows
steady amber. ■ Camera is in Favorite mode.
■ Camera firmware update is in process.
■ Camera is connected to computer, USB connection
is active.
■ Date and time set with lens retracted.
Power ring
blinks green.
■ Camera turned off while picture is being processed and
saved. Camera operating normally. Processing is
completed before power off.
■ Do not remove the card while the light is blinking.
■ Camera operating normally at power up. Take pictures
when the blinking stops.
■ Camera operating normally during connect mode to
computer.
Power ring
blinks amber.
■ Battery is low or exhausted. Recharge the
battery ( page 1 ).
■ Internal camera temperature is too high. Turn the camera
off for several minutes; then turn it back on. If the
condition continues, get help (
page 75 ).