Kodak C300 - Manual (Page 13)

Taking pictures and videos
www.kodak.com/go/support 7
Using digital zoom
Use digital zoom in any Still mode to get up to 5X closer to your subject.
IMPORTANT: You may notice a decrease in printed image quality when using digital
zoom. The blue slider on the zoom indicator pauses, then turns red when
the picture quality is less than 1 MP. For an acceptable 4 x 6 in. (10 x 15 cm)
print, ensure that the slider remains blue.
1 Press the OK button to turn on the camera screen,
then press to activate digital zoom.
The camera screen displays the zoomed image and the
zoom indicator.
2 Press to zoom in or out (T -Telephoto or W -
Wide).
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting,
press .
NOTE: You cannot use digital zoom for video recording.
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash is effective between 2.6 - 7.9 ft (0.8 - 2.4 m). You can only change the flash
setting in Still modes.
To change the flash settings, see page 21 .
Zoom indicator
Press the button repeatedly to scroll
The active flash icon is displayed in the
camera screen status area (see
page 5 ).
through flash options (see Flash modes table).