Kodak Z5120 - Manual (Page 61)

www.kodak.com/go/support 53
12
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on, off; buttons do
not function. ■ Charge rechargeable batteries ( see page 1 ); replace
non-rechargeable batteries.
Camera freezes when
a card is inserted or
removed. ■ Turn the camera off, then back on. Make sure the camera is
turned off before inserting or removing a card.
LCD is too dark. ■ Adjust the LCD Brightness setting ( see page 46 ).
In Review, a blue or
black screen is
displayed instead of
a picture. ■ Transfer the picture to the computer ( see page 36 ), then format
the card or internal memory ( see page 47 ).
Caution: Formatting a card deletes all pictures and
videos.
■ Take another picture.
In Review, you do not
see a picture (or the
expected picture) on
the LCD. ■ Format the card in the camera ( see page 47 )
Caution: Formatting a card deletes all pictures and
videos.
Flash does not fire. ■ Check the flash setting, and change as needed ( see page 14 ).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full. ■ Transfer the pictures to the computer ( see page 36 ).
■ Delete pictures from the card ( see page 25 ) or insert a new card.
The Reset All Camera
Settings feature did
not take effect. ■ After using the Reset All Camera Settings feature ( see page 46 ),
turn the camera off and then on again.