Kodak Z5010 User Manual
Page 54
46
www.kodak.com/go/support
Troubleshooting
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation (
).
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation (
).
Pictures that have
KODAK PERFECT
TOUCH Technology
applied (twice) are
of lower image
quality.
■
If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer
(or on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to pictures
taken in Smart Capture mode.
Status
Solution