Kodak CX6230 - Manual (Page 40)

28
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in high-contrast scenes, or for retaking
pictures when you are not satisfied with the brightness.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
1 In any Still mode, press the Menu button.
2 Press to highlight the Exposure Compensation icon , then
press the OK button.
3 Press to select the Exposure
Compensation setting.
!
If pictures are too light, decrease the
value.
!
If pictures are too dark, increase the
value.
4 Press the OK button to accept the change.
5 Press the Menu button to exit the menu.
6 Use the camera screen or viewfinder to
frame your subject. Press the Shutter button
to take the picture.
This setting remains until you change the
Mode dial or turn off the camera.