Liveview—framing with the camera screen – Kodak CX6230 User Manual
Page 31
19
Chapter 2
Liveview—Framing with the Camera
Screen
When you turn on Liveview, the camera screen displays a live image of what the
lens sees. Use the camera screen to frame your subject.
IMPORTANT: Liveview significantly reduces battery life.
1
Turn the Mode dial to any Still capture
position.
2
Press the OK button to turn on Liveview.
3
Frame your subject in the camera screen.
4
Press the Shutter button half-way to set the
exposure and focus.
5
When the ready light glows green, continue
pressing the Shutter button completely
down
to take the picture.
When the ready light blinks green, the
picture is being saved; you can still take
pictures. If the ready light is red, wait
until it turns green.
See
Flash Settings in Each Mode, page 23
See
Changing Picture-Taking Options,
.
6
To turn off Liveview, press the OK button.
NOTE: If Picture Quality is set to Best (3:2), the
Liveview image is displayed at a 3:2
aspect ratio, as shown, with a black bar
at the top of the screen.
To change the Liveview setting so that it is on whenever the camera is on, see
.
OK