Kodak CX4210 - Manual (Page 22)

14
Chapter 2
Liveview—Using the LCD to Frame Your
Subject
When you turn on Liveview, the LCD displays a live image of what the lens sees.
Look at the LCD to frame your picture.
1 Make sure the camera is in Capture mode
(
on the LCD).
2 Press the OK button to turn on Liveview.
3 Frame your picture in the LCD.
4 Take the picture.
5 To turn off Liveview, press the OK button.
NOTE: Liveview quickly depletes battery power;
use it sparingly. To conserve battery
power, Liveview automatically turns off
after one minute.
To change the Liveview setting so it is on whenever the camera is on, see
page 39 .
OK