Troubleshooting and support, Picture frame problems, 5 troubleshooting and support – Kodak D1030 User Manual
Page 41
www.kodak.com/go/support
35
5
Troubleshooting and support
For step-by-step product support, visit
and
select Step-by-Step Solutions & Repair.
Picture frame problems
If...
Try one or more of the following
Frame does not
turn on.
■
Make sure the power cable that was included with your frame is
connected securely (see
).
■
Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
Nothing happens when
a memory card or USB
device is connected.
■
Insert a certified SD/SDHC/MMC/XD Card, with images, into the
upper designated card slot, then push to seat it (see
).
■
Insert a certified MS Duo/Duo Pro Card, with images, into the
lower designated card slot only, then push to seat it (see
).
NOTE: Do
not insert an MS Pro or MS Pro Duo card in the top slot. It
could get stuck and damage the card or your frame.
■
Make sure the USB device is connected securely (see
).
■
Make sure the file format of your pictures is supported. (See
).
NOTE: Pictures may take a longer time to display when the files are large or when
using a large capacity memory card or other connected device.
Touch border doesn’t
work.
■
Use your finger to make your selections on the Quick Touch
Borders (see
). Lights on the border show you where to
touch.
IMPORTANT:
Do not slide on the right border (tap only).
■
Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.