Running a continuous slide show loop, Displaying pictures and videos on a television, Pre-tagging for album names – Kodak P850 User Manual
Page 66: First-on your computer
59
www.kodak.com/go/support
Doing more with your camera
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, move
to highlight Loop, then press the OK button.
2 Move
to highlight On, then press the OK button.
When slide show is started with Loop On, the slide show repeats until you press the OK
button or until battery power is exhausted. The Loop feature remains until you change
it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
). The slide show stops if you
connect or disconnect the cable while the slide show is running.
1 Connect an audio/video cable (AV-8) from the camera USB, A/V Out port to the
television video-in port (yellow) and audio-in port (white). See your television
user’s guide for details.
2 Review pictures and videos on the television.
Pre-tagging for album names
Use the Set Album feature to pre-select album names before you take pictures or
videos. Then, all the pictures or videos you take are tagged with those album names.
First—on your computer
Use Kodak EasyShare software that came with your camera to create album names on
your computer. Then copy up to 32 album names to the album name list the next time
you connect the camera to the computer. See Kodak EasyShare software Help for
details.