Upgrading your firmware (recommended), Changing your frame orientation – Kodak P730 User Manual
Page 35
Changing settings and more
www.kodak.com/go/support
29
Upgrading your firmware (recommended)
Firmware is the software that runs on your frame. To check for the latest version, visit
.
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to the root directory (not in a folder or subfolder) of a memory
card or USB flash drive, then insert into the frame. See
for copying files.
4 Tap
(Menu), then tap
(Settings).
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade or damage to the internal memory may occur.
When the upgrade is complete, your frame automatically restarts. If it doesn’t, wait 10
minutes, then press the power button on the frame to Off, then back to On.
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation
. You can turn the
frame on its side to change the orientation to portrait
. But, you must also change
the orientation setting to portrait (
).
Landscape
Portrait