Care and maintenance – Kodak Z712 IS User Manual
Page 62
56
www.kodak.com/go/support
Appendix
Power—Kodak lithium digital camera battery CRV3; Kodak Li-Ion rechargeable
digital camera battery KLIC-8000; AA lithium batteries; 3V AC adapter; EasyShare
dock
Communication with computer—USB 2.0 full speed (PIMA 15740 protocol), via
USB cable (U-8), EasyShare dock
PictBridge support—Yes
Self-timer—2 seconds, 10 seconds, 2-shot
White Balance—Auto, Daylight, Open Shade, Tungsten, Fluorescent (available only
in PASM)
Color modes—High Color, Natural Color, Low Color, Black & White, Sepia
Date stamp—On, Off
Tripod mount—1/4 inch
Operating temperature—32–104° F (0–40° C)
Size—4.1 x 2.9 x 2.7 in. (10.4 x 7.4 x 6.9 cm) @ power off
Weight—10.6 oz (300 g) without card or battery
Care and maintenance
■
If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
.