Kodak OLED Wireless - Manual (Page 9)

Setting up for wireless operation
www.kodak.com/go/digitalframesupport 9
security key (WEP or WPA) on the on-screen keyboard. Slide along the bottom of the
touch border (or tap below slider arrows) to highlight a character then tap
(Select) to enter it in the text box. Tap Done when finished.
NOTE: The screen identifies your security as either WEP or WPA.
A WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive),
10 or 26 characters (0-9, A-F, not case sensitive).
A WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
Congratulations! You have successfully connected to your network. Return to this
screen later to verify your network and frame connections. See
page 13 .
3 If you haven’t done so already, install KODAK EASYSHARE Digital Display Software
(see page 10 ) so your frame can display wireless content properly.
Slider arrows
Backspace - erases text
Keep sliding (or tapping
arrows) left/right to go to the
previous or next row.
Select Text box
Navigation tip: