Axion 8" TFT LCD TV with Card Reader - Manual (Page 16)

16
1. CARD/TV/AUX Switch
― Video signals from video
equipment connected to the audio/video input can be
displayed on the monitor by pressing this button. Each
time the button is pressed, the audio/video source will
change.
2. POWER On/Off
― Turns the power of the unit on and off.
3. Numbers 0-9
― Use for direct entry of channel numbers.
To select channel numbers above 99 when in CATV mode,
press 1
― key followed by the two digit number (up to 25)
that you wish to jump to. For example: 1
― 22 will take
you to channel 122.
4. TV/CATV Select
― Use to select regular VHF/UHF air
broadcast TV or 125 channel cable TV.
5. MUTE
― Temporarily shuts off the audio coming from the
speakers or headphones.
6. PICTURE Select
― Each time you press this button,, the
on-screen picture adjustment will display the “adjustment
bars” for Contrast, Brightness, Color, Tint, Sharpness,
Language and Factory Reset. Once the desired
adjustment bar is displayed, use the VOLume + or -
buttons to adjust the setting. The display will automatically
turn off if no adjustments are made within 10 seconds, or if
the picture button is pressed several times.
7. VOLume +Up/–Down
― Use to adjust the volume of the
audio coming from the TV/DVD unit and to increase and
decrease certain settings within the on-screen setup
menus.
8. TV Channel AUTO MEMORY
― Press this button to
begin the auto channel setup.
9. TV Channel SKIP SEARCH
― Press this button to toggle
between skip on and skip off. When on, the TV will only
tune to the channels that were set up using the Auto
Memory search. When off, the TV will tune all channels
regardless of Auto Memory search settings.