Printing from an easyshare all-in-one printer – Kodak V1073 User Manual
Page 50
44
www.kodak.com/go/support
Transferring, printing, tagging
Direct printing with an EasyShare all-in-one printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need: a camera with fully charged battery, a
PictBridge enabled printer, and a USB cable.
Connecting the camera to an EasyShare all-in-one printer
1 Turn off the camera and printer.
2 Connect the appropriate USB cable from the camera to the printer. See your printer
user guide for details.
Printing from an EasyShare all-in-one printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu interface turns off, press any
button to redisplay it.
2 Tap a printing option.
Current Picture—
Tap
to choose a picture. Choose the number of copies.
Tagged Pictures—
If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print—
Print thumbnails of all pictures. (This option requires one or more
sheets of paper.) If the printer is capable, choose a print size.
Selected Pictures—
Print all selected pictures in internal memory, or on a card.
Image Storage—
Choose Auto or Internal Memory.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see
.
Purchase accessories