Kodak V1073 - Manual (Page 19)

Taking pictures/videos
www.kodak.com/go/support 13
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any Still mode, tap Settings to open the Settings
panel.
2 Tap Self-Timer/Burst repeatedly, until the desired
Self-timer icon appears at the bottom of the LCD:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, auto-shutter release on a
tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
NOTE: In Panoramic modes ( page 39 ), only the 2- and 10-second options are available. Use the same
procedure to take a 2- or 10-second self-timer video, but press the Shutter button completely down.
Using burst
Use burst to take up to 3 pictures in quick succession.
1 In P mode (or in some SCN modes), tap Settings to
open the Settings panel.
2 Tap Self-Timer/Burst repeatedly, until the Burst icon
appears at the bottom of the LCD.
3 Press the Shutter button halfway to focus and set
exposure.
4 Press the Shutter button completely down and
hold it to take pictures.
Self-timer/Burst
Self-timer/Burst