Battery charging options, Upgrading your software and firmware, Additional care and maintenance – Kodak Z710 User Manual
Page 64
58
www.kodak.com/go/support
Appendix
■
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean,
dry cloth before loading batteries in the camera.
■
Battery performance is reduced at temperatures below 41
°
F (5
°
C). When using
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.
Battery charging options
Kodak EasyShare camera dock series 3—powers your camera, transfers
pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak EasyShare printer dock series 3—powers your camera, makes
4 x 6-in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak 3-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
Additional care and maintenance
■
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow components to air-dry for at least 24 hours before using the camera again.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as