5 connecting to a computer, Connecting to a macintosh computer, Connecting to a computer – Kodak DC40 User Manual

Page 35: 5connecting to a computer

Text mode
Original mode

January 1996

Connecting to a Computer

Serial cables for Macintosh computers and Windows software are
included with the camera. This chapter describes how to connect the
camera to those computers.

Connecting to a MACINTOSH Computer

You can connect the DC40 camera to your Macintosh computer’s
serial port.

IMPORTANT:

Use only the cable provided with the DC40 camera.

1. Turn off the camera by sliding the lens cover switch to the OFF position.

2. Plug one end of the Macintosh cable into the modem port or printer

port on the back of your Macintosh computer.

If both ports are in use, disconnect the cable from the more
convenient port and then connect the camera cable.

3. Lift the rubber tab to uncover the camera’s serial port.