Vollrath Mirage 1800 Watt Fajita Heater Induction Ranges - Manual (Page 4)

F
ajita
S
killet
P
an
H
eater
O
peratOr
’
s
M
anual
4
t
roubleShooting
Problem It might be caused by Course of Action
The unit turned off after 10
seconds.
There is not a pot/pan on the induction range or the pot/pan is not
induction-ready cookware. The induction range turned off. This is normal.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE Section of this manual.
The unit is on, but not
heating.
The cookware may be too small or may not be induction-ready.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE of this manual.
The digital display lights are
flashing.
The overheat-protection feature may have activated. Remove cookware. Let cooking surface cool.
The unit suddenly stopped
working.
The unit may be too close to an external heat source or the air intake
may be restricted.
Relocate the unit away from any external heat
source. Clear any obstructions to the air intake.
Flashing Message
(F code)
It might be caused by Course of Action
F9 (Bad Pan - F9) The cookware may be too small or may not be induction-ready.
Make sure the pot/pan is induction ready. See the
FUNCTION and PURPOSE of this manual.
F2 (Too Hot - F2) The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.
F8 (Bad Flow - F8)
The unit may be too close to an external heat source or the air intake
may be restricted.
Relocate the unit away from any external heat
source. Clear any obstructions to the air intake.
F4 (Heatsink - F4) The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.
F5 (Heat Therm - F5) The overheat-protection feature may have activated.
Remove cookware. Let cooking surface cool. Clear
any obstructions to the air intake.
S
ervice and
r
ePair
There are no user serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the induction range or replace a damaged
power cord yourself. Do not send units directly to the Vollrath Company. Please contact the qualified professional repair service listed below.
VOLLRATH Induction Repair Service • 1-800-825-6036 (USA) or www.vollrathco.com
When contacting the Authorized Professional Service Center, please be ready with the model number, serial number, and proof of purchase showing the date
the unit was purchased.
i
nduction
r
ange
W
arranty
i
nformation
The Vollrath Company will warranty the induction ranges covered in this manual for a period of one (1) year in accordance with the policy stated above. Any
damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered
under warranty.