Vollrath Cayenne HD 2880 Watt Manual Control Induction Ranges - Manual (Page 3)

F
oodservice
i
nduction
r
anges
3
ENGLISH
O
peratOr
’
s
M
anual
d
igital
c
ontrol
M
odel
on
off
on
off
temp
power
timer
timer
temp
power
G H
I
J
B
F D
A
E C
Figure 2. Digital Model Control Panel
A
ON/OFF button. Press to turn unit on. An LED above the control
will illuminate when switched on.
B
ON LED light. Illuminates when the power is switched on.
C
POWER/TEMP button. Used to change the mode and display
panel from power to temperature.
D
POWER LED light. Illuminates when the unit is in the power
mode.
E
TEMPERATURE LED light. Illuminates when the unit is in the
temperature mode.
F
DISPLAY panel. Displays the power level or time depending
upon the mode selected and model.
G
UP button. Used to increase the power level or time depending
upon the mode selected and model.
H
DOWN button. Used to decrease the power level or time
depending upon the mode selected and model.
I
TIMER button. Used to switch on and start the timer function.
J
HOB LOCATION. Shows which hob the control is operating.
Adjusting the Power and Temperature
1. Press the on/off button (A) to turn on the hob on. See Figure 2. The on
led (B) will illuminate. When induction-ready cookware is placed on the
range, the display will remain “steady on” with a value. This indicates
the unit is heating. Models with two heating surfaces will have separate
ON/OFF buttons for each heating surface.
2. Press the power/temp button (C) to choose a cooking power level
(1 – 100) or an approximate temperature (100° – 400° F). The power
led light (D) will illuminate when the unit is in the power mode. The
temperature light (E) will illuminate when the unit is in the temperature
mode.
3. Press the up button (G) or the down button (H) to increase or decrease
the power level or temperature.
WARNING
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
very rapidly. Use caution when adding pre-heated oil, liquid or other
food already in the cookware.
M
anual
c
ontrol
M
odel
C
A
A
B B
C
Figure 1. Manual Model Control Panel
A
CONTROL KNOB. Controls the amount of heat transferred to the
induction ready cookware.
B
INDICATOR LED light. Illuminates steady when an induction
ready pan is on the hob and the control knob is between the “low”
to high” range. Blinks 1 time per second when no pan or a non
induction ready pan is on the hob.
C
HOB LOCATION. Shows which hob the control is operating.
D
KNOB GUARD (not shown). Helps protect the control knob from
damage.
1. Rotate the control knob (A) to the desired setting. See Figure 1. The
indicator led light (B) will illuminate steady when an induction ready
pan is on the hob and the control knob is set between the “low” to
“high” range. The indicator led light (B) blinks when no pan or a
non induction ready pan is on the hob and the control knob is set
between the “low” to “high” range.
2. When the cooking or heating is complete. Rotate the control know to the
“off” position and remove the cookware.
3. Clean the equipment after each use. Follow the CLEANING section in this
manual.