Vogels PFW 6854 - Manual (Page 6)

Page 6 Installation Instructions
Thread Depth Indicator
1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts
measure the same full depth and mark it (Figure 1).
2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied).
3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.
4. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3), until you find one that comes closest to
your mark without going past.
Thread Depth
Indicato r
Marking Scre w
Marking
Scre w
Thread Depth
Indicato r
Inverted Fla t
Panel Displa y
Marking the
Dept h
Thread Inser t
Thread Depth
Indicato r
PFW 6854
Figure 1
Figure 2 Figure 3