TotalPond MF13015 User Manual
Page 4

4
7. Connect the fountain head on the top extension tube. Fig. 7
Fig. 7
8. Place the filter assembly in the water. Fig. 8
Fig. 8
9. Connect the extension tubes to the diverter valve. Pay
attention to the markings on the ends of the diverter valve.
The end with the “P” connects to the pump. The end with the
“
↑
” points up, and connects to the fountain head. Fig. 9
Fig. 9
10. For 1/2 in. tubing, connect the tubing onto the second output
of the diverter valve. Connect the other end of the tubing to a
spitter or other water feature. Fig. 10
NOTE: Tubing and spitter are NOT INCLUDED.
Fig. 10
Filter box top
Fountain head
Extension tube
Diverter valve
1/2 in. tubing
Diverter
valve
Extension tube
Water flow