TotalPond PF850 User Manual

Page 4

7. Place the cover (with the o-ring attached) over the top of the

tank. Fig. 7

Fig. 7

8. Screw the lid onto the top of the tank. Make sure that it is

secure, or the filter will leak. Fig. 8

Fig. 8

9. Connect a length of tube from the outlet of a pump to the inlet

of the filter (upper hole). Connect a length of tubing from the
outlet of the filter (lower hole) to a water feature. Fig. 9

NOTE: Pump and tubing is NOT INCLUDED. The adapter is

compatible with 1/2 in. or 3/4

in.

tubing.

Fig. 9

Cover

Tank

Lid

Tank

Out