Silent Call VC4003-SS - Manual (Page 6)

5
Erase Memory
(Performing an erase will remove all learned transmitter codes from your Vibra-Call 3)
• With the Vibra-Call 3 receiver in the Docking Port press and hold the program
button on the Docking port. (see photo on page 2)
• Hold down the program button and the receiver will vibrate once. Continue to
hold down the button.
• After 4 seconds the receiver will initiate 2 short vibrations, continue holding
the program button and after another 6 seconds the receiver will initiate 3 short
vibrations.
• Release the program button and all previously learned transmitter codes will
have been successfully erased.
Optional Accessories
Optional accessories for the Vibra-Call 3 receivers include:
• 3 pack of protective rubber skins –Model # Skins
• Replacement leather Pouch-Model # LP-12
Product Specs
Frequency: 418 MHz
Main Power: Input AC 120v Output 16VDC 1.12A, 18W
Port Battery Backup: 12 VDC, 800 mAh
Receiver Batteries: (2) AAA rechargeable Batteries
Current Draw: Idle 15 mA, Alert Condition – all alert mechanisms active 150 mA.