Silent Call VC4003-SS - Manual (Page 2)

Installation and Operations Manual
Signature Series 418 Mhz VIBRA-CALL 3 Receiver and Docking Port
Model # VC4003-SS
General
The Vibra-Call 3 is a body worn battery operated alerting device that includes the Vi-
bra-Call 3 Docking Port equipped with battery backup. It can be used with any Silent
Call Signature Series 418 MHz transmitter. The transmitters available are the Sound
Monitor, Telephone, Doorbell, Smoke Detector, CO Detector, Fire Alarm Transmitter,
Door/Window Access, Weather, and Pressure Sensitive Door or Bed Mat.
Installation
Installing the Vibra-Call 3 receiver and Docking Port consists of locating it where
it can be seen most effectively for the user. If using the Bed Vibrator or optional
Strobe Light then place the Docking Port on a table or night stand near your bed.
• Plug the power supply into the DC barrel type female jack on the back of the
Docking port (See locations below) and then into any standard household 120v
AC outlet.
• Turn the power switch to the on position. This will also turn on the backup
battery.
• If using the Bed Vibrator or optional Strobe Light, then plug those into the
corresponding locations on the back of the Docking Port.
1