Silent Call SK2-SS - Manual (Page 5)

5
LCD Display:
The LCD Display screen is back lighted. The back light brightness is automatically controlled by the light
level in the room. When the room becomes dark, the back lighting comes on. When the room becomes
light, the back lighting goes off.
Telephone Direct Interface:
The Sidekick II Signature Series Receiver has the ability to plug a standard telephone line directly into
the receiver using the supplied telephone wire and dual connector and it will notify you each time the
telephone rings.
Plug the dual connector into your phone jack wall outlet. Then plug the wire from your telephone into
one side of the dual connector. Next, take the telephone wire that came with your Sidekick II Signature
Series Receiver and plug it into the other side of the dual connector (See illustration #1.) Finally, plug the
other end of that cable into the back of the Sidekick II Signature Series Receiver (See illustration #2.)
The receiver will notify you in the same way as if you were using a Telephone Transmitter (see section on
Notifications).
Illustration #1
Illustration #2