Nostalgia Electrics KEG8000 RETRO RED - Manual (Page 9)

E
N
G
LI
S
H
7
CO
2
Tanks & Kegs
INSTALLING THE CASTERS
Note: Two of the Casters include locking mechanisms to ensure the unit does not slide on
hard floors. These two locking Casters should be fastened at the front end of the unit.
1. Empty the inside of the cabinet completely and lay the kegorator
down on its back. We recommend that you place a piece of cardboard
or cloth underneath the cabinet to prevent dents or scratches.
2. Insert the Casters into the holes on the bottom corners of the cabinet. Tighten each Caster.
3. Once all four Casters have been tightened, stand the cabinet in its upright position.
DANGER!
CO2 can be dangerous! CO2 cylinders contain
high-pressured gas, which can be hazardous if handled
improperly. They must be handled with care.
INSTALLING THE DOOR HANDLE
Hardware
• Attach #2 Door Plate to door aligning 3 #1 Screws with corresponding holes in door.
• Slide #3 Door Handle into #2 Door Plate until locked into place.
#1 Screw
Qty. 3
#2 Door Plate
Qty. 1
#3 Door Handle
Qty. 1
When you purchase the first keg of beer, you must also have your CO2 cylinder
filled at your local supplier. CO2 tanks can be refilled at locations such as
welding supply shops, party stores, or wherever kegs are purchased.
Copper
Tube