Nostalgia Electrics KEG8000 RETRO RED - Manual (Page 7)

E
N
G
LI
S
H
5
INTRODUCTION
Thank you for buying the retro KEGORATOR from Nostalgia Electrics! This easy-
to-assemble unit keeps the beer flowing and the good times rolling in or at every
garage, barbeque or rec room. With a few basic parts and these simple instructions,
you'll be tapping your own keg in no time, in classic '50s-inspired style!
• The kegorator comes with a 2.5 lb. CO2 bottle, which should
be able to dispense four 15 gallon kegs of beer.
• Capacity: 6.0 cu. ft.
• Unit dimensions: L 30.75" x W 21.5" x H 39" (not including tap tower)
• Tap tower is 15.25" from base to highest point of handle
• The following dimensions are recommended for clearances around the kegorator:
Sides …………………… ¾” (19 mm)
Back ……………………. 1” (25 mm)
• Unit weight: 86 lbs
Compatible Keg Types
The kegorator can hold either one ¹
/6
Barrel Keg, one ¼ Barrel Short, one ¼
Barrel Slim or one ½ Barrel. This kegorator
DOES NOT fit non-standard keg sizes.
NOTE: Keg Coupler fits D-Sankey Keg
Valves. Attaching the Keg Coupler
will add height to the Keg.
IMPORTANT: Allow unit to cool for at
least 12 hours before purchasing a keg.
Kegs ¹
/6
Barrel ¼ Barrel Short ¼ Barrel Slim ½ Barrel
Gallons 5.16 7.75 7.75 15.50
Keg Capacity 1 1 1 1
12 oz. Beers 55 82 82 165
Weight (Full
in lbs.)
58 87 87 161