AT&T Trimline 205 - Manual (Page 15)

13
Flash
Access special telephone company subscriber
services such as call waiting or 3-way
conference. It may also be necessary to press
other buttons before or after pressing
FLASH,
as explained in the custom calling instructions
provided by your local telephone company. When
there is a call waiting signal, press
FLASH to
put the current call on hold and connect to the
new call. Press
FLASH again to return to the
original call. Also, press FLASH to activate other
telephone company subscriber services such as
3-way conference.
Redial
This telephone always stores the last telephone
number dialed in its memory. The redial
memory can accept numbers up to 32 digits.
The telephone will remain in memory until
another telephone number is dialed. To dial the
same number again, lift the handset, and press
REDIAL.
Tone
Temporarily changes from dial pulse to touch
tone during a call for users of rotary service.
It allows access to services which require
tone signaling, including some tone activated
computer systems (e.g., telephone banking).
1. Dial the destination number with the
DIAL set
to DP.
2. Press TONE. All buttons pressed after this will
send tone signals.
3. After hanging up, the telephone returns to
pulse dial service.
Operation
Handset operation
NOTE: When TONE is pressed, or if TONE is in a memory location, there
will be a pause to allow the set to switch from PULSE to TONE.