NITECORE P15 - Manual

HIGH MID LOW
LUMENS
150
LUMENS
430
LUMENS
35
LUMENS
1
2 h 15 min 8 h 15 min 37 h
LOWER
520 h
1 h 45 min 6 h 30 min 310 h 31 h
278m
(Beam Distance)
19321cd (Peak Beam Intensity)
IPX-8, 2m (Waterproof AND Submersible)
1.5m
(Impact Resistant)
1Ч
18
65
0
2Ч
CR123
®
User Manual
Features
• Premium CREE XP-G2 (R5) LED
• Maximum output of 430 lumens
• Integrated “Precision Digital Optics Technology” provides extreme reflector
performance
• Boasts a peak beam intensity of 19,321cd and a throw distance of up to 278
meters
• High efficiency circuit board provides up to 520 hours runtime
• Side switch interface provides one-handed operation and easy access to all
flashlight functions
• Side switch features a power indicator light displays remaining battery power
(patented)
• Power indicator’s secondary function displays battery voltage (accurate to
0.1V)
• Intelligent memory function stores preferred brightness setting
• Integrated impact resistance mechanism with reverse polarity protection
(patented)
• Flashlight head retaining ring protects the core components from damage
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aero grade aluminum alloy with HAIII military grade
hard-anodized finish
• Waterproof in accordance with IPX-8 (two meters submersible)
• Impact resistant to 1.5 meters
• Stainless steel titanium-plated two-way clip included
• Tail stand capability
Dimensions
Length: 151mm (5.94”)
Head Diameter: 40mm (1.57”)
Tail Diameter: 25.4mm (1”)
Weight: 132grams (4.66oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: [email protected]
Web: www.nitecore.com
Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Brightness & Runtime
ALL-ROUND Flashlight Expert
Accessories
Quality holster, clip, tactical
ring, lanyard, spare tail cap,
spare O-ring
Battery Options
Please follow our facebook for
more info: NITECORE Flashlights
Operation instructions
Battery installation
Insert one 18650 battery or two CR123
batteries with the positive pole pointing
forward (toward the light head).
WARNING
1. Ensure batteries are inserted with the
positive (+) end pointing to the head.
The P15 will not operate with incorrectly
inserted batteries.
2. Ensure when turning the P15 on, the
beam is directed away from the eyes of
people or animals.
Momentary illumination
Momentary illumination can be achieved by switching off the flashlight and
then half pressing and holding the tail switch. Simply release the switch to
turn the light off.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a “click” is
heard.
General Operations
With the light turned on, press the side switch in quick succession to cycle
through the following brightness levels: ultra-low, low, medium and high. Once
a desired setting is displayed, it may be saved by turning the light off at the
tail switch.
Note: For user safety and to prevent overheating / failure, the P15 will
automatically switch to a lower mode after three minutes of use at its highest
level of output.
Special Modes
With the light turned on, press and hold the side switch to activate Strobe
mode. Press and hold once again to access Location Beacon mode and
repeat once more for SOS mode. To exit any one of these modes simply
press the side switch to be returned to your previously used brightness level.
NB: Strobe mode is the default special mode and is the only special mode
that has a memory function. If the light is turned off at the tail switch while in
strobe mode, strobe will resume when the light is next turned on. SOS and
Location Beacon modes have no memory function.
Power Tips
1. With the light switched on, the power indicator will blink once every two
seconds when power levels reach 50%.
2. With the light switched on, the power indicator will blink rapidly when power
levels are low.
3. With the light turned off, press and hold the side switch while
simultaneously pressing the tail switch to display the battery voltage
(accurate to ±0.1V) with a series of blinks. For example, when the battery
voltage is at a maximum charge of 4.2V, the power indicator will blink 4
times in quick succession, followed by a one second pause and two more
blinks, indicating a total battery voltage of 4.2V.
Changing Batteries
When the power indicator blinks rapidly this indicates the batteries need to be
replaced. Alternatively if the light becomes dim or unresponsive to adjustment
this also indicates batteries need to be replaced.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective products
can be exchanged for replacement through a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning
NITECORE® products will be repaired free of charge for a period of 18
months from the date of purchase. After 18 months, a limited warranty
applies, covering the cost of labor and maintenance, but not the cost of
accessories or replacement parts. The warranty is nullified in all of the
following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or send an email to
[email protected]
The Nitecore official website shall prevail in case of any product data changes.
NOTICE
The above data has
been measured in
accordance with the
international flashlight
testing standards
ANSI/NEMA FL1 using
one x 3.7V 2600mAh
Nitecore 18650 battery
and 2 x 3V 1550mAh
Nitecore CR123
batteries under
laboratory conditions.
The data may vary
slightly during
real-world use due to
battery type, individual
usage habits and
environmental factors.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to
develop the ANSI FL1 standard of measurement. Product testing data is in
accordance with these internationally recognized scientific standards.
P15
SIZE Nominal voltage Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V Y