MSI Fuzzy 945GME2 V1.1 User Manual

Page 52

3-16

MS-9642 Mainboard

Soft-Off by PWR-BTTN

This feature allows users to configure the power button function. Settings are:

[Instant-Off]

The power button functions as a normal power-on/-off button.

[Delay 4 Sec.] When you press the power button, the computer enters the

suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.

USB KB Wake-Up from S3

This setting allows you to enter

“Any Key” (max. 8 numbers) to wake up the

system from S3 state.

Resume By Alarm

When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.

Date (of Month) Alarm

When Resume By Alarm is set to [Enabled], the field specifies the month
for Resume By Alarm.

Ti me (hh:mm:ss) Al arm

You can choose what hour, minute and second the system will boot up.

PWRON After PWR-Fail

This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:

[Off]

Leaves the computer in the power off state.

[On]

Leaves the computer in the power on state.

[Former-sts]

Restores the system to the status before power fail-
ure or interrupt occurred.