MSI K8T Master2-FAR7 - Manual (Page 59)

3-19
BIOS Setup
Power Management Setup
Suspend M ode
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings: [Disable], [1 Min], [2 Min], [4 Min], [6
Min], [8 Min], [10 Min], [20 Min], [30 Min], [40 Min], [1 Hour].
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Former-sts] Restores the system to the status before power failure or
interrupt occurred.
Hammer Fid Control
This item lets you adjust the CPU ratio. Setting to [Startup] enables the CPU running at
the fastest speed which is detected by system. Setting options are: [Startup], [x4]~
[x11].
Hammer Vid Control
This item lets you adjust the CPU VID. Setting to [Startup] enables the CPU running at
the default VID which is detected by system. Setting options are: [Startup], [0.825V],
[0.850V], [0.875V],~, [1.550V].