MSI PROBOX23 - Manual (Page 3)

 Safety Precautions
The following precautions should be observed while handling the system:
 Place the system on a flat and stable surface.
 Do not place the system in environments subject to mist, smoke, vibration,
excessive dust, salty or greasy air, or other corrosive gases and fumes.
 Do not drop or jolt the system.
 Do not use another power adapter other than the one enclosed with the system.
 Disconnect the AC/DC adapter before performing any installation procedures on
the system.
 Do not perform any maintenance with wet hands.
 Prevent foreign substances, such as water, other liquids or chemicals, from
entering the system while performing installation procedures on the system.
 Use a grounded wrist strap before handling system components such as CPU,
Memory, HDD, mini PCI-E card, etc.
 Place system components on a grounded antistatic pad or on the bed that came
with the components whenever the components are separated from the system.
 Other Notice
 The peripheral devices contained herein may vary depending on your actual
system configuration.
 Third-party trademarks and names are the properties of their respective owners.
 The information contained herein relevant to software and hardware is for
reference only and in accordance with actual system configuration. All information
is subject to change without notice.
 Upgrade and Warranty
Do not attempt to upgrade or replace any component of the product, if you are not an
authorized dealer or service center, since it may cause the warranty void. It is strongly
recommended that you contact the authorized dealer or service center for any
upgrade or replace service.
 Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible ones) of the
product users purchased in certain countries or territories may be fulfilled by the
manufacturer within 5 years at most since the product has been discontinued,
depending on the official regulations declared at the time. Please contact the
manufacturer for the detailed information about the acquisition of spare parts.
2